Concrete
NDT Non Destructive Testing Concrete
SonReb analysis - Assessment of concrete strength with combined method Ultrasonic velocity (with 58-E4900) / Rebound index (with 58-C0181/DGT)
The development and improvement of in-situ test techniques better known as non-destructive test methods (NDT) are the result of the need to investigate the quality and integrity of new structures as well as problems associated with historical buildings, as the progressive aging of concrete structures and the effect of chemical attacks on concrete, often due to air pollution or to the use of chlorides in winter to prevent icing. This section includes a vast selection of NDT instruments and apparatus.
Concrete Test Hammer
The concrete test hammer is used to evaluate the surface hardness of hardened concrete...
Covermeter, Bartracker
Used to measure the thickness of concrete cover over steel reinforcement bars and metal pipes,
Ultrasonic Pulse Velocity Tester
used for quality control and inspection of concrete. It measures the transit time...
Chloride Ion Penetration Meter
This test method allows concrete to be evaluated in terms of chloride permeability,
Digital Rebound Test Hammer
This method can be used to assess the uniformity of concrete in situ, to delineate zones or...
Ultrasonic Pulse Analyzer
The PULSONIC is used for measuring the velocity of ultrasonic pulses through a concrete section
Chloride Field Test Set
This test set, which correlates to ASTM C114 and AASHTO T260, is used for the determination of the c
Cross-Hole Analyzer for Foundation Piles Wireless Modular Version
The cross-hole method is a way to analyze the foundation piles of buildings,
Pull-Off Tester
The apparatus is mainly used to evaluate the bond strength of two layers of concrete...
Cor Map Apparatus for Rebar Corrosion Location
the Cor Map apparatus, using the half cell method, can be plotted on a grid...
Resonance Frequency Meter
Used for determining the Longitudinal, Transverse (Flexural) and Torsional resonant frequency...
Carbonation depth determination - CARBONTEST
Carbonation is a serious problem for many reinforced concrete buildings that have been in service
Carbonation Test Set
This simple test allows the measurement of depth of carbonation through the surface of concrete.
Air and Water Permeability Test Set. John Figg Method
This method covers the determination of susceptibility to chloride and carbonation penetration...
Automatic Motorized Pull-Off Bond Strength Tester
Fitted with a high resolution load cell and houses a built-in motorized hydraulic actuator automat..
Crack Width Gauges
Used for measuring the crack widths in different positions: walls, corners, floor...
Crack Width Microscope
A high quality microscope designed for measuring crack widths in concrete members, masonry walls...
Deep Scanning Metal Locator
Finds rebar and metallic pipes, conduit, metal studs, junction boxes and metal framing up to 150 mm