Cement & Mortar
Physical and Chemical Properties
Inorganic binders have had a role in the construction industry since pre-classical times and, after successive transformations, are today briefly classified as cements, limes and plasters. Today, the various types of binders are well known, particularly cements, and they are becoming ever more sophisticated with pre-mixed cements designed to satisfy specific structural requirements.
Le Chatelier Flask
Used to determine the specific gravity of hydraulic cement and lime.
MULTIPURPOSE 500-600 and 500-600/15 kN Cement Compression and Flexural Machines, Multipurpose Models. WIZARD AUTO Control System
WIZARD AUTO Standard Automatic compression machines
Le Chatelier Moulds
Used for determining the expansion of cement. The mould consists of a spring tensioned..
Two Gang Prism Mould 25x25x285 mm to ASTM
This mould is used for the Expansion of Portland cement
Autoclave, High Pressure
The autoclave consists of a high-pressure steam vessel for cement expansion tests.
Blaine Fineness Apparatus
Used to determine the particle size of Portland cement, limes and similar powders
Bulk Density of Cement
Used to determine the bulk density of cement
Calorimeters
Two versions available: with standard Beckman thermometer and with digital high resolution.
Carbon Dioxide Content in Cement
The testing equipment consists of: Y-piece with Mohr clip; CO2 absorption tower for gas...
Cement Samplers
Made of brass. two versions are available.
Hydraulic Shrinkage Mould 40x40x160 mm
The 62-L0009/G version is used for the determination of linear shrinkage of cement mortars.
Length Comparator
Is used for a number of length measurements concerning mainly cement and mortar specimens
Mortar Bar Container
Used for determining the potential alkali reactivity of cement aggragate combination.
Mortar Bar Container for Accelerated Method
For potential alkali reactivity of cement aggragate combination (accelerated method).
Prism Mould 25x25x280 mm to UNI
Used for accelerated expansion test on mortar prisms to UNI 11504.
Prism Mould 75x75x285 mm to UNI
Used for expansion test on concrete prisms to UNI 11604.
Steel Measure, 400 ml
Used as a density method for the determination of the air content of freshly mixed mortars.
Three Gang Moulds 40x40x160 mm, EN 196-1
Used to produce the mortar specimens for compression and flexural tests.