GENERAL UTILITY - Standard Automatic Compression Testers for Cubes and Cylinders WIZARD AUTO

Print this page

General Description

Main features include: Rigid welded steel construction Accuracy Class 1/A (EN/ASTM) starting from 10% of full scale (from 1% on request) Two...

Main Features

WIZARD AUTO is CONTROLS new standard automatic Quality Control machine for compression and flexural testing and includes many new features and enhancements to improve the user-friendliness, efficiency, operator comfort and energy savings.

QC testing performance has just taken a step change improvement with CONTROLS abandoning manual test control and now features automatic closed-loop PID control of loading-rate using VFD inverter-technology control of the high specification AC motor.

Wizard Auto automatically and accurately performs tests at the correct test speed, ensuring compliance to Standards and with no effect due to operator variables.

Mainly dedicated to routine failure tests (compression, flexure and indirect tensile), WIZARD AUTO is the perfect solution to ensure total certainty of testing accuracy and strict conformity to international Standards. In fact being an automatic system it allows:

Reduced opportunities for operator errors, improving accuracy of results and repeatability
Easy-to-use: even for operators with limited expertise.
Conforming to Standards: the machine automatically performs the test at correct test speed. Conformance to Standards can be easily proven.
High performance: high speed pump closes the daylight above the specimen at the fasted speed allowing a very high throughput of tests.
Operator comfort due to the significant noise reduction.
Energy saving, with 50% reduction in energy consumption.

Ask an Expert Quote

Technical specifications

Description

Main features include:

Rigid welded steel construction
Accuracy Class 1/A (EN/ASTM) starting from 10% of full scale (from 1% on request)
Two channels for load sensors
Wide graphic display 128 x 80 pixel
Graphic printer available as option
AC motor fitted with VFD INVERTER device: high efficiency, low consumption, silent operation
Dual stage pump for fast approach and automatic switch to high pressure for loading
Second frame optional facility

Frame
Rigid welded steel construction. Spherical seat allows free alignment at the initial contact with the specimen.

Compression platens
See table. Traceable certificate of surface hardness available on request.

Safety features
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front and rear flexible transparent fragment guard.

Products

Code

Description

Units

Technical Specifications

WIZARD AUTO AUTOMATIC POWER AND CONTROL SYSTEM

Hydraulic

Max pressure 700 bar
Power 750 W
Dual stage pump: low pressure/high delivery for fast piston approach and high pressure/low delivery for loading.
AC motor fitted with VFD inverter device featuring high efficiency, reduction of power consumption and silent operation.
Second frame optional facility using valve selector.

Hardware

Two 16 bit analog channels for load sensors
Wide graphic display 128 x 80 pixel
Sampling rate 50 Hz
Internal memory
RS 232 port for data download (including load/time graph points) to PC in ASCII format
Integrated printer as optional. See accessories

Firmware

Real time display of load and stress
Automatic application of the selected load rate
Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
Peak detection and saving
Language selection
Multi-coefficient linearization of the calibration curve for better accuracy at low loads
Multiple units: Lbf / Ton / kN.

PHYSICAL SPECIFICATION TABLE

Model 50-	C13W02 C13W04	C23W02 C23W04	C34W02 C34W04
Capacity kN	1500	2000	3000
Max vertical daylight, mm*	350	350	350
Horizontal daylight, mm	265	340	370
*Max. piston travel, mm**	50	50	50
Platen dimensions, mm	dia. 220	dia. 220	dia. 300
Platen surface hardness	55.5 HRC (600 HV)	55.5 HRC	55.5 HRC (600 HV)
Platens flatness toll, mm	0.03	0.03	0.03
Overall dimensions, mm	810 x 425 x 1085	835 x 440 x 1090	805 x 450 x 1160
Weight approx., kg	305	525	755

*With accessory 50-C50/CYL vertical clearance is increased by 20 mm. See test accessories.

Accessories and Spare Parts

Code

Description

Units

Documents

Automatic and Smart Testing Systems Range Brochure
- en
- es
- mx
- us
Wizard Auto Datasheet
- en
- es
- fr
- us

Videos

Introducing the all NEW WIZARD AUTO

WIZARD-AUTO (Version française)

WIZARD-AUTO (Version Española)

GENERAL UTILITY - Standard Automatic Compression Testers for Cubes and Cylinders WIZARD AUTO

General Description

Main Features

Description

Products

Technical Specifications

Accessories and Spare Parts

Documents

Videos

Related Products

Compression Devices for Cement and Mortars

Flexural Test Device for Concrete Beams

Splitting Tensile Test Devices

Flexural Frame for Std Beams, 150 kN Cap.

Unbonded Capping Pads

Cylinder Capping Equipment