EN - Standard Automatic Compression Testers for Cubes, Cylinders and Blocks WIZARD AUTO

Print this page

General Description

Main features include: Two channels for load sensors Wide graphic display 128 x 80 pixel Graphic printer available as option AC motor fitt...

Main Features

WIZARD AUTO is CONTROLS new standard automatic Quality Control machine for compression and flexural testing and includes many new features and enhancements to improve the user-friendliness, efficiency, operator comfort and energy savings.

QC testing performance has just taken a step change improvement with CONTROLS abandoning manual test control and now features automatic closed-loop PID control of loading-rate using VFD inverter-technology control of the high specification AC motor.

Wizard Auto automatically and accurately performs tests at the correct test speed, ensuring compliance to Standards and with no effect due to operator variables.

Mainly dedicated to routine failure tests (compression, flexure and indirect tensile), WIZARD AUTO is the perfect solution to ensure total certainty of testing accuracy and strict conformity to international Standards. In fact being an automatic system it allows:

Reduced opportunities for operator errors, improving accuracy of results and repeatability
Easy-to-use: even for operators with limited expertise.
Conforming to Standards: the machine automatically performs the test at correct test speed. Conformance to Standards can be easily proven.
High performance: high speed pump closes the daylight above the specimen at the fasted speed allowing a very high throughput of tests.
Operator comfort due to the significant noise reduction.
Energy saving, with 50% reduction in energy consumption.

Ask an Expert Quote

Technical specifications

Description

Main features include:

Two channels for load sensors
Wide graphic display 128 x 80 pixel
Graphic printer available as option
AC motor fitted with VFD INVERTER device: high efficiency, low consumption, silent operation
Dual stage pump for fast approach and automatic switch to high pressure for loading
Second frame optional facility

Frame
Four column high stiffness welded frame tested for stability to EN 12390-4.
Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.

Compression platens
See table. Traceable certificate of surface hardness available on request.

Safety features
Includes: Max. pressure valve to avoid machine overloading; piston travel limit switch; emergency stop button; front door and rear transparent fragment guard.

Products

Code

Description

Units

Technical Specifications

WIZARD AUTO AUTOMATIC POWER AND CONTROL SYSTEM

Hydraulics

Max pressure 700 bar
Power 750 W
Dual stage pump: low pressure/high delivery for fast piston approach and high pressure/low delivery for loading.
AC motor fitted with VFD inverter device featuring high efficiency, reduction of power consumption and silent operation.
Second frame optional facility using valve selector.

Hardware

Two 16 bit analog channels for load sensors
Wide graphic display 128 x 80 pixel
Sampling rate 50 Hz
Internal memory
RS 232 port for data download (including load/time graph points) to PC in ASCII format
Integrated printer as optional. See accessories

Firmware

Real time display of load and stress
Automatic application of the selected load rate
Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
Peak detection and saving
Language selection
Multi-coefficient linearization of the calibration curve for better accuracy at low loads
Multiple units: Lbf / Ton / kN.

PHYSICAL SPECIFICATION TABLE

Models 50-	C47W02 C47W04	C57W02 C57W04
Capacity, kN	2000	3000
Platens dim. mm	310x510 mm	310x510 mm
Platen surface hardness, HRC	55.5	55.5
Platens flatness toll, mm	0.05	0.05
Ram travel mm	50	50
Max. vertical daylight mm*	350	350
Horizontal daylight mm	350	370
For specimen size: Cubes cm Cylinders cm (dia.xh) Blocks	10, 15, 20 10x20, 15x30, 16x32 Within platen dim.	10, 15, 20 10x20, 15x30, 16x32 Within platen dim.
Overall dim. (lxdxh) mm	920x600x1030	1010x625x1100
Weight approx. kg	730	1095

*To be adjusted using the suitable distance pieces. See accessories

Standards

EN 12390-4
EN 772-1

Accessories and Spare Parts

Code

Description

Units

Documents

Automatic and Smart Testing Systems Range Brochure
- en
- es
- mx
- us
Wizard Auto Datasheet
- en
- es
- fr
- us

Videos

Introducing the all NEW WIZARD AUTO

WIZARD-AUTO (Version française)

WIZARD-AUTO (Version Española)

EN - Standard Automatic Compression Testers for Cubes, Cylinders and Blocks WIZARD AUTO

General Description

Main Features

Description

Products

Technical Specifications

Standards

Accessories and Spare Parts

Documents

Videos

Related Products

Compression Devices for Cement and Mortars

Flexural Test Device for Concrete Beams

Splitting Tensile Test Devices

Lifting Assembly for Block Testing Platens

Flexural Frame for Std Beams, 150 kN Cap.