Description
They provide a very accurate electrical signal, strictly proportional to the strain of the specimen submitted to load application, for determining the Elastic Modulus and strength characteristics as alternative to the Compressometer-Extensometers 55-C0222/G which can be used only on samples with min dia.75mm and min height 160mm. They can be applied to the specimen surface by a special Adhesive-Catalyst agent and other accessories all included in the 82-P0399/C Strain gauge application kit.
Up to 4 strain gauges ¼ bridge, and up to 8 ½ bridge, can be directly connected by one or two interfaces 82-P0398 to to our automatic control consoles MCC or Automax Multitest which are suitable for cyclic loading and automatic determination of the Modulus of Elasticity.
Strain gauges can also be connected, by one or two interfaces 82-P0398, to a suitable data logger as, for example, our model 82-P9008, when the load application on the specimen is performed with Automatic compression testers as, for example the AUTOMAX PRO and PILOT PRO models. In this case, one of the channels of the Datalog 82-P9008 should be used for the load signal coming from an additional pressure transducer with selecting valve fitted to the compression tester.
Please get in touch with our technicians for complete information and service.
