Description
Four columns robust frame with single or double test chamber. Simple effect ram with electrical limit switch.
All the models, single or double test chambers, are fitted with 165 mm dia. round compression plates and have to be completed with the suitable accessory. All frames are fitted with precision load cell for load measurement.
Connection to control consoles
The 15 kN load pistons of the double test chamber model 65-L28Z10 and single chamber model 65-L58Z10 connected to Pilot and Automax Control consoles, require the 65-L1400/X5 pressure regulator which.
Machine/Frames precision Class. EN 12390-4, ASTM E74
All frames, when connected to a suitable control console, can be calibrated to Class 1 starting from 10% of load scale as specified in the specification table. By special calibration procedure, it is possible to obtain Class 1 starting from 3 to 300 kN (calibration code 50-C0050/CAL) and starting from 0.5 to 15 kN (calibration code 50-C0050/CAL5). This option has to be specified at time of order.
Safety features
Model 65-L17Z10 include a cylindrical transparent fragment guard. All the other models can be completed with the relevant protection. All models are fitted with ram travel limit switch.
*Only when connected to Pilot Pro and Automax Pro PCS
