Technical Specifications
Hydraulics
- Dual stage pump: centrifugal low pressure for fast approach and automatic switching to radial multi-piston high pressure for loading
- DC motor. 720 W, 50-60 Hz
- Maximum working pressure 650 bar
- Third and fourth frame option, active frame selection by software
- Flow-sharing technology to perform loading and unloading cycles
- ES Energy Saving technology to reduce power consumption and silent operation
Hardware
- 131.000 points effective resolution
- High frequency closed-loop P.I.D. control
- Control frequency 500 Hz
- Sampling rate 250 Hz
- 4 channels for load sensors (pressure transducers and load cells)
- 6 channels to measure strain values with transducers (LVDT, magnetostrictive, potentiometetric)
- 4 channels for strain measurement with strain gauges
- Memorization of the calibration curve enables sensors to be connected and used immediately
- Digital linearization of the calibration curve (multi-coefficient)
PC and software
Main software MULTITEST allows:
- Remote control of the whole system and automatic execution of test including: fast approaching, zeroing, test execution, numerical and graphical management of test results, etc.
- Active frame selection via software
- Printing and saving of customized test reports both for single and batch tests in Excel format
- Multi-language selection, customizable with a further local language (only latin characters).
- Automatic load measurement verification procedure including data acquisition and printing of traceable calibration certificates, when the PC is connected to the digital readout unit mod. 82-P0801/E and the suitable load cells
- the use of 4 software packages each one tailored for a specific test method
DATAMANAGER software package (included) for compression, indirect tensile, 3 points and 4 points flexural tests on different types of specimens
E-MODULE software package (optional, see Accessories) for Elastic modulus and Poisson ratio determination allowing:
- Free unlimited programmable load/stress cycles to fulfill any kind of test procedure
- Real time monitoring of test data, stress/time, stress/axial strain, stress/lateral strain graphs
- Automatic verification of sample positioning and sensors functionality, as per standards requirements
- Automatic calculation of test results as per Standards requirements
UTS software package (optional, see Accessories) for steel tensile testing allowing:
- Test control up to yield by:
- Stress (method B)
- Strain by using extensometer (method A1)
- Strain by using crosshead (method A2)
- Control after yield by grips’ separation
- Simultaneous display of: stress/elongation [mm], stress/time; stress/elongation [%] and elongation [mm]/time, with possibility to display multi diagrams
- Elaboration of tension test results: ReH, ReL or Rp, fp, Rt, A, At, Ag, Agt, A, At, Ae, E, Z , ft/fy, fy/fynom conforming to EN ISO 6892-1 (methods A1, A2, B) and EN 15630-1
D-Control software package (optional, see Accessories) for displacement controlled tests allowing:
- Automatic calculation of test results according to EN 14651, 14488-3, 14488-5, UNI 11039-2, ASTM C1550, C1609, C947, UNE 83515
- 8 test pre-set testing procedures according to the above Standards
- Customizable test procedure allowing desired loading history
- Possibility to change in real time the test parameters: target load/displacement, control variable, test speed.
Physical specifications
Power rating: 700 W
Dimensions (d x w x h): 650 x 500 x 1350 mm
Weight approx.: 100 kg